Sale

Atas 30A BLHeli ESC with BEC

Be the first to review this product

Runs BLHeli, which has been thoroughly tested to be free of sync issues running on 3S and 4S on all of the popular miniquad motors up to 2300kv. 

Specifications

  • Flashed with BLHeli, OneShot enabled
  • Ready to fly! No further configuration required.
  • Complete 3S and 4S compatibility with up to 2300kv motors
  • 18mmx54mm (heat shrink edge to edge) x 9.6mm high at thickest point
  • 25g with full length wires and heatsink (removable for 2g saving)
  • Sound beacon - after some 10mins (configurable) the ESC will start the motors beeping to help you find your quad
  • 5V, 2A BEC
  • 'No BEC' option - single wire connection to flight controller to minimize wiring mess. 
  • Battery input leads uses enhanced 18AWG for those attempting motor/prop combinations with higher current requirements
  • Input capacitor enhanced to support 25V for safe 4S operation

You should use 1 BEC (to power the FC) and 3 No-BEC ESCs in a quad. 

Shipping weight: 0.030 Kg 
Atas 30A BLHeli ESC with BEC is available for purchase in increments of 1
Only 1 left

Availability: In stock

Regular Price: SGD$19.68

Special Price SGD$5.61

Description

Details

Runs BLHeli, which has been thoroughly tested to be free of sync issues running on 3S and 4S on all of the popular miniquad motors up to 2300kv. 

Specifications

  • Flashed with BLHeli, OneShot enabled
  • Ready to fly! No further configuration required.
  • Complete 3S and 4S compatibility with up to 2300kv motors
  • 18mmx54mm (heat shrink edge to edge) x 9.6mm high at thickest point
  • 25g with full length wires and heatsink (removable for 2g saving)
  • Sound beacon - after some 10mins (configurable) the ESC will start the motors beeping to help you find your quad
  • 5V, 2A BEC
  • 'No BEC' option - single wire connection to flight controller to minimize wiring mess. 
  • Battery input leads uses enhanced 18AWG for those attempting motor/prop combinations with higher current requirements
  • Input capacitor enhanced to support 25V for safe 4S operation

You should use 1 BEC (to power the FC) and 3 No-BEC ESCs in a quad. 

To mount, we suggest placing the heat generating side facing UP, on the arms, below the propeller. The heat generating components of the ESC are located on the side with NO writing on the heat shrink.  You can make out a big flat surface, which is the heatsink through the shrink - this is your heatsink and the 6 hot FETs below. If you are mounting on the arms below the propeller, you can even remove the heatsink for weight savings.

Configuration

The inexpensive USB adapter (see related items below) gives you access to all BLHeli settings like reversing motor direction as well as flashing new firmware with a user friendly interface.  

  • Change settings to find what works for your motor/battery/prop combo
  • Reverse motor direction easily after solding it to your ESC
  • Take advantage of further advancements in BLHeli by flashing new versions
  • Set other parameters such as beacon, PPM range etc 

BLHeliSuite software is available here and source code here

Reviews

Write Your Own Review

You're reviewing: Atas 30A BLHeli ESC with BEC

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)