EzUHF Transmitter

Be the first to review this product

The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by theEzUHF transmitter, so any radio can be used with your TrackR2 now. Support for any radio battery voltage is guaranteed as well, as the EzUHF transmitter has a power-in jack which will accept a 3S LiPo, so no soldering in your RCtransmitter is required. For Futaba systems using a 9.6V battery or 3S LiPo the EzUHF transmitter can be powered directly from it, with just a single cable. The battery voltage, either from the external battery, or provided by the radio,obviously is monitored and an audible alarm will sound when the battery gets low.

The EzUHF transmitter also comes with a power boost switch, which boosts the power if you happen to put yourself in a tight spot and need to regain control.

Features:
  • Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
  • 433MHz/70cm Ham band operation
  • GFSK modulation
  • 600mW (~28dBm) output power
  • Direct head-tracker input, adding head-tracker compatibility to most radios
  • Power switch, boost power when at long range
  • Standard SMA antenna connector, compatibility with 70cm antennas
  • Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
  • Standard USB port (Mini-A) for firmware upgrades, and system configuration
  • Single pushbutton learning of failsafe positions
  • Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx
  • Mates with 8 channel, and 4 channel EzUHF receivers
  • Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
  • Built in receiver, for future expansion
  • Custom extruded brushed aluminum enclosure
Shipping weight: 0.450 Kg 
EzUHF Transmitter is available for purchase in increments of 1

Availability: In Stock. Ships in 1-2 days

SGD$293.71

Description

Details

The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by theEzUHF transmitter, so any radio can be used with your TrackR2 now. Support for any radio battery voltage is guaranteed as well, as the EzUHF transmitter has a power-in jack which will accept a 3S LiPo, so no soldering in your RCtransmitter is required. For Futaba systems using a 9.6V battery or 3S LiPo the EzUHF transmitter can be powered directly from it, with just a single cable. The battery voltage, either from the external battery, or provided by the radio,obviously is monitored and an audible alarm will sound when the battery gets low.

The EzUHF transmitter also comes with a power boost switch, which boosts the power if you happen to put yourself in a tight spot and need to regain control.

Features:
  • Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
  • 433MHz/70cm Ham band operation
  • GFSK modulation
  • 600mW (~28dBm) output power
  • Direct head-tracker input, adding head-tracker compatibility to most radios
  • Power switch, boost power when at long range
  • Standard SMA antenna connector, compatibility with 70cm antennas
  • Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
  • Standard USB port (Mini-A) for firmware upgrades, and system configuration
  • Single pushbutton learning of failsafe positions
  • Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx
  • Mates with 8 channel, and 4 channel EzUHF receivers
  • Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
  • Built in receiver, for future expansion
  • Custom extruded brushed aluminum enclosure
But there’s more, as all EzUHF products feature a common USB connector which, in combination with our application software, will allow you to set up your receivers in just the way you like. Mikrokopter mode, the cloning of channels, diagnostics, firmware updates, etc. etc. all available with the click of your mouse or a press of a button, no soldering required, nor any fancy non-standard cable. Convenient, simple and intuitive, leaving you with more time to enjoy your flying, rather than spending hours or days setting up your equipment.

More Information

There is currently a firmware update for compatiblity issue with the Futaba 8FG radios due to the variable PPM frame rate they seem to use.  ImmersionRC has that firmware update listed here in the "Downloads" section to make make the 8FG work with the EzUHF Tx.
 
The use and operation of this type of product in many countries may require a license and some countries may forbid its use entirely. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Drone Matters cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Reviews

Write Your Own Review

You're reviewing: EzUHF Transmitter

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.